Do you have a dishwasher? For the unit to last for a long time, you should take good care of it. One of the most effective ways of doing it is by observing a set of dos and don’ts. Here is what you need to do as given by appliance repair professionals:
Do run full loads
The purpose of doing this is to minimize the amount of water
that the appliance uses when doing the dishwashing. When you run the unit half
full, you tend to spend a lot of water that you shouldn’t.
For you to conserve water, you should always run full loads
of the appliance.
While you should run when the unit is full, you should take
care that you don’t overfill it. This is because doing so leads to a
malfunctioning appliance. You also tend to damage your utensils.
Don’t face all the plates in one direction
How you place plates has a great impact on how clean they
get among many other things. One of the mistakes you should avoid making is
placing the plates in such a way that they all face the same direction.
The best way of going about it is placing the plates on the
bottom rack while they are facing inwards towards the spray arms. When it comes
to the small plates, place them in front of the larger ones. This is to ensure
that the spray reaches them.
When you are arranging the utensils in the dishwasher, you should arrange them in such a way that you are going to save time when unloading. This calls for you to put the forks with the forks and the knives with the knives.
You should place the handles facing up so that you don’t get poked or punctured as you are taking them out.
Spoons are bound to stay dirty if you place them in a
spooning position; therefore, you should insert some of them with the handles
facing down.
Do clean the dishwasher
It’s a no brainer that you need to clean the dishwasher. The cool thing is that it’s easy to clean it; therefore, you don’t need to worry about hiring a professional to help you out. All you need to do is to remove all the dishes in the unit and carefully clean the unit. You should also remember to clean the outside.
For you to keep all the parts running, consider running an empty cycle at least once a day. The best time to do it is at the end of the workday.
Don’t wash the dishes beforehand
To make the work easy for the dishwasher, it’s recommended that you remove the excess food that might be on the dishes. Some people go to the extent of pre-washing the dishes.
You don’t have to do this as it would be pointless putting the pre-washed dishes into the dishwasher.
It would be better simply washing the dishes by hand, don’t you think? If you have to remove the excess food materials, you should simply scrape them off—don’t go to the extent of washing them off.
Do use hot water
Most of the dishwashers are connected to the hot water. This
water is meant to melt the fat that might be present and at the same time
disinfect the machine and plates. Hotter always means cleaner; therefore, you
should always use hot water.
If there are plastics in the batch that you are cleaning,
you should take care that you don’t use extremely hot water that will cause
damage.
Don’t unload from the top to bottom
Did you know how you unload the dishwasher is important? If you unload it the wrong way, you might have to repeat the cleaning process all over again. As a rule of thumb, you should avoid unloading the dishwasher from the top rack. This is because the rack might be containing water that can spill onto the dishes below.
Commercial appliance repair Northern VA professionals recommend that you unload the dishwasher from the bottom. Obviously this way there is no way you can spill the water onto the other dishes.
