Oh no! It’s a hot day, and you find your Frigidaire refrigerator ice maker not making ice. Don’t call the professionals just yet. Before assuming it’s broken, there are a few things you can check yourself.
Troubleshooting Tips for a Frigidaire Refrigerator Ice Maker Not Making Ice
With hot summer days approaching, a broken ice maker is an urgent issue. To help you find the cause fast, we made this Frigidaire refrigerator ice maker troubleshooting guide:
Ice Maker Control Arm Off
If you find your ice maker not working but water does, the first thing to check is the control arm. This part acts as the switch to turn your refrigerator ice maker on or off.
It’s pretty easy to knock the control arm to the on or off position if you’re moving food around in your freezer. A telltale sign that it’s the arm causing the issue is if you find your Frigidaire ice maker not cycling. Simply move the arm to the ON position and wait to see if this fixes your ice maker problems.
To be sure the control arm is the problem, do a full Frigidaire ice maker reset. Depending on your model, you can perform a hard reset on your ice maker using the control panel. Hold the on/off button until the LED is red. Wait a couple of minutes and then hold the same button until it’s green.
Refrigerator Water Line Frozen
Sometimes, a Frigidaire refrigerator ice maker not making ice is due to frozen water clogging the supply line. Frozen water will restrict or completely block water going to your fridge.
To check the supply line yourself, start by moving the refrigerator to look behind it for the supply line. Unplug the unit and turn off the water supply. You can defrost the line in a few ways.
If you have time to kill, leave the refrigerator off for a few hours to let it defrost. For more immediate results, blow a hairdryer over the line. If your Frigidaire refrigerator ice maker not making ice persists, it may be time to call in a professional
Ice Maker Error Code
An easy way to find the cause of your ice maker not making ice is to check the control panel. If you see an error code, look it up in the owner’s manual or online. It will tell you if a part has failed and may indicate one of the above problems.
Refrigerator Water Filter Clogged
If your ice maker isn’t producing enough ice or the cubes are small, the culprit could be a clogged water filter. Before water goes to the ice maker or water dispenser, it flows through the filter to get rid of any impurities. Over time, the filter will reach it’s capacity and will clog up, restricting water flow.
Luckily, you can easily fix this by replacing the water filter. To find out where the filter is located on your specific model, look in the owner’s manual or look up your Frigidaire model online.
Tip: Replace the water filter in your refrigerator every 6 months, so you know your water is always clean and fresh. A good indication it needs to be replaced is if your ice tastes bad!
For ice maker repair near Minneapolis, give D&T Appliance a call. We’ll have your refrigerator ice maker working in no time!