Is your Dacor dishwasher leaving food particles or white residue on your dishes after running a cycle? Don’t worry, this can be a common problem, even for high-end models. The good news is that a Dacor dishwasher not getting dishes clean can usually be diagnosed and fixed quickly by following a few simple tips.
Dacor Dishwasher Not Getting Dishes Clean?
Here’s What to Check…
White spots and stuck-on food residue are often caused by improper use or lack of maintenance. In some cases, the problem may not even be with your dishwasher. Start by making sure that the water supply is working as it should.
Water Supply Issues
Your dishwasher needs to have a steady flow of hot water in order to function and clean properly. You’ll need to make sure that it’s getting what it needs to leave dishes sparkling like new.
Temperature Too Low
The water coming into your dishwasher needs to reach at least 120°F in order to remove stubborn bits of food. Try running your kitchen sink as hot as it can go, then pour some in a glass and test it with a thermometer. If it’s not hot enough, try gradually turning up your home’s water heater.
Hard Water
A Dacor dishwasher leaving white residue on dishes may be due to hard water. Try adding some white vinegar in a bowl on the top rack to act as an additional rinse aid. If that doesn’t work, you may need to add a home water softener.
Not Getting Enough Water
Test your water supply by running a cycle, then open the door when you hear the dishwasher stop filling. If the wash basin is not full, you may have a defective inlet valve which should be replaced by a professional.
Photo Credit: Thrifty and Chic
Improper Use
Not following the manufacturer’s guidelines is the most common cause of a Dacor dishwasher not getting dishes clean. Here’s what you may be doing wrong.
Detergent and Rinse Aid
Using the wrong type or incorrect amount of detergent can result in poor cleaning performance. In fact, using too much dish soap over time can even cause dishwasher leaking issues that can do real damage to your kitchen floor.
To solve both issues, we recommend using Finish detergent tablets. They provide the perfect amount of soap along with great cleaning results in one convenient package. Finish rinse aid can also improve performance for both cleaning and drying.
Use the Right Cycle
Your Dacor dishwasher offers several useful cycle options that can be selected from the control panel. If you’re washing heavily-soiled plates, pots or pans, make sure to choose the Heavy cycle setting.
Loading Dishes Correctly
Be sure not to jam as many dishes as you can into a single load. Evenly space cups and bowls on the top rack facing down at an angle toward the spray arm. Utilize the rack adjusters if needed to make more room on top or bottom.
Space large dishes and larger cookware evenly on the bottom rack, also facing down toward the lower spray arm. Spoons and forks should be facing up in the silverware rack, while sharper utensils should always face down. Most importantly, make sure that nothing is blocking either spray arm from spinning freely.
Part Failures
If you’ve followed these tips but still have a Dacor dishwasher not getting dishes clean, don’t waste time and water hand washing dishes. You may just have a faulty part on your hands. The usual suspects include broken spray arms, clogged inlet valves, or even faulty detergent dispensers.
While it’s possible for a handy DIYer to fix these problems themselves, we recommend professional service for all high-end dishwasher repairs. Give Cody’s Appliance Repair a call today for the area’s fastest, most dependable Dacor appliance repair Boise.
